how to draw a 3d triangle in autocad
xviii Answers
Ok. the best solution which works in every software is that you draw the kickoff line, then draw a circumvolve whose radius equals to the length of second line at the start of the first line. And repeat drawing the circle with the length of tertiary line at the cease of the first line.
The result is the intersection of 2 circles which you accept to connect the intersection with the kickoff and end of the first line.
Polygon button on the Draw console/toolbar. In 2012 it'south hidden nether the rectangle command.
If you know the lenghts you tin can discover the angles, or at least one bending. It is simple trigonometry. From then yous can describe the trianlge.
have u e'er used autodesk tutorials?that tin help u
Perhaps the question was if yous only know the length of the sides.
Start the Polygon tool.
Enter number of sides (three)
Instead of picking a middle point press Eastward and enter.
Enter the length of an border and printing enter.
This volition simply create an equilateral triangle. If y'all desire a different blazon of triangle, you would need to utilise some of the parametric constraints and dimensions.
This will let you to constrain the line ends together and then drive the length of the lines with parametric dimensions.
At the command line blazon polygon, 3, pick a centerpoint for the triangle, so choose inscribed "I" if you want to size the triangle using a circle radius from signal to point or confining "C" using a circle from apartment to flat. Here is the text you can cut and paste to create a 1" radius inscribed triangle at 0,0,0.
(control "polygon" "3" "0,0,0" "I" "1")
by using polygon tool you lot can draw the triangle. as
click on the "polygon"
enter the number of sides(3)
and pick the center point and draw the triangle.
this volition allow yous to describe the equilateral triangle.
The parametric option and the Ehsan solution (to a higher place) is the only two possibility for this question!
if y'all know the exact length but draw a line due west/ exact length re-create & rotate it to lx deg then mirror it. you take a perfect triangle w/o going to polygon command.
just press 'l' + 'enter push button on keyboard'+ 'click on the screen' + 'move the mouse to the right of the indicate' + 'press length of the triangle' + 'press enter button on keyboard'
at present press 'Esc'+ press '50'+ 'press enter button on keyboard' + 'click on the 1st betoken' + 'move the mouse up of the first betoken'+ 'enter the height of the triangle' + 'press Esc on keyboard'
now press '50' + 'press enter push button on keyboard' + 'click on the point to a higher place the ehight of the triangle' + 'now click on the point right to the triangle' + ' now press Esc'
thats all.......:)
Ehsan'south manner is the only sensible 1; using polygon and parametric to construct it only makes the process longer, by all ways use parametric to constrain information technology afterwards, if the cartoon needs it.
write "polygon" in command space bottom in car cad
select showtime bespeak
then blazon "iii" ( "3" sided triangle if you want pentagon blazon "five")
select size do you want by mouse
or enter radius of circle
congraulation y'all make a tri angle
u can use polar co-ordinate method with line command. u can take length and angle. thn u create triangle.
example :
L ENTER
PICK POINT
@ii<0
@2<120
@two<240.
U CREATE ALSO HEXAGON PENTAGON & MORE WITH THIS METHOD.
Why not just draw lines using lengths and degrees?
In Autocad 2013 and 2014,go to Draw toolbar,click polygon,enter number iii to represent the three sided polygon which is a triangle.Then specify the center of the triangle by clicking any where in the drawing area,press in for inscribe circumvolve and ci for circumscribed circle and press enter.When entered a triangle will shown in your drawing model,Finally simply specify the radius of circle by typing the required radius and press enter.Thats it.....I hoped my caption helps..
Only from Polygon Command>
Step 1 : Select POLYGON control.
2: Type number of corners and printing ENTER. (a Triangle have 3 edges or corners)
three. Define the eye point of object.
4. Now printing "I" for inscribed circle or printing "c" for circuminscribed circle and press enter.
DONE
If we assume that the three sides are different sizes, the but method that will work reliably is the intersecting circle plan mentioned above. If, yet, two of the sides are the aforementioned size, some of the other options higher up will work. It is important to read all of a question and sympathise what is being asked earlier offering a solution. How often have you engineered an elegant programme only to find that the programme did not satisfy the customer'southward requirements?
Type Pol.
Then type iii
then left click.
Then enter. F8 (ortho on)
and so left click
Source: https://grabcad.com/questions/how-do-draw-a-triangle-with-autocad
0 Response to "how to draw a 3d triangle in autocad"
Post a Comment